AA-BOND F162 High Temp, Fast Cure, Low Visc, 2 Part Fiberoptics Epoxy Ahesive

PRODUCT DESCRIPTION:

AA-BOND F162 is a thixotropic electrical insulating epoxy adhesive system with low vapor pressure and outgassing characteristics.

AA-BOND F162 was specifically developed for fiber optic, laser, photonic and electronic applications requiring excellent electrical insulation in combination with effective thermal dissipation from heat-producing components.

AA-BOND F162 is two-part epoxy compound develops strong, durable, stable, high impact thermally conductive bonds at room temperature, and adheres readily to itself, and to metals, many plastics, silica, steatite, alumina, sapphire and other ceramics, glass, and to many other materials.

AA-BOND F162 provides excellent resistance to salt solutions, mild acids and alkalis and many other chemicals including petroleum solvents, lubricating oils and alcohol.

PRODUCT DESCRIPTIONS:

UNCURED PROPERTIES:

CURING SCHEDULE:

CURED PROPERTIES:

GENERAL INFORMATION:

For safe handling information on this product, consult the

Safety Data Sheet, (SDS).

HOW TO USE:

1.       Carefully clean and dry all surfaces to be bonded

2. Apply AA-BOND F162 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together.

Contact pressure is adequate for strong, reliable bond; however, maintain contact until adhesive is completely cured.

3. Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container must be thoroughly mixed prior to use.

4. Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY

This epoxy can be supplied in many different packages.