Technical Product Bulletin
OPTICALLY TRANSPARENT LOW VISCOSITY EPOXY ADHESIVE
PRODUCT DESCRIPTION
AA-BOND F110 is an optically clear adhesive with a very low viscosity.
AA-BOND F110 is room temperature system an excellent choice for thin bond-line assembly and repair applications of prisms, lenses and other optic components. And its high strength makes this epoxy ideal for structural applications.
AA-BOND F110 exhibits excellent wetting and wicking capabilities which allows it to adhere strongly to glass, ceramics, metals and most rigid plastics.
PRODUCT PROPERTIES
| Color | Part A (Resin): Clear Part B (Hardener): Clear to light yellow |
| Cure Type | Room Temperature or Heat cure |
| Benefits |
|
| Mix Ratio by weight | 100:11 Resin to Hardener |
| Substrates | Excellent choice for thin bond-line assembly and repair applications of prisms, lenses and other optic components |
| Operating Temperature | -40°C (-40°F) to +130°C (266°F) |
| Substrates | Most metals, Ceramics, Glass and Etc. |
| Typical Applications | Electrical casting and encapsulating, circuitry, electronic component casting and etc. |
UNCURED PROPERTIES
| Mixed Viscosity @ 25 °C cps | 310 ±50 |
| Specific Gravity gm/cc | Mixed: 1.16 |
| Reactive solids contents, % | 100 |
| Pot Life | 30 minutes |
CURE SCHEDULE
| 24 hours | At 25°C (77°F) |
| 1-2 hours | At 65°C (149°F) |
CURED PROPERTIES
| Hardness, Shore D | 84 |
| Volume Resistivity ohm. cm | 6.0 E+13 |
| Lap Shear Strength alum to alum, PSI | 2150 (24 hrs @ 25°C) 2600 (1 hr @ 65°C) 3000 (4 hrs @ 65°C) |
| Dielectric strength, volts/mil | 410 |
| Coefficient of Thermal Expansion | 90 X10⁻⁶ in/in/°C |
OPTICAL PROPERTIES
| Refractive Index | 1.54 |
| Transmission, Visible | 97% |
GENERAL INFORMATION
For safe handling information on this product, consult the Safety Data Sheet, (SDS).
HOW TO USE
- Carefully clean and dry all surfaces to be bonded.
- Apply AA-BOND F110 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
- Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
- Allow the product to cure according to the cure schedule.
AVAILABILITY
This epoxy can be supplied in many different packages.
Data Sheets: TDS | MSDS available upon request.
