AA-BOND 28 Heat Resistant, Low Exotherm, 100% Solids, Chemical Resistant, Epoxy Adhesive

$4.99
SKU:
AA-BOND 28-1

Technical Product Bulletin

HIGH STRENGTH BONDING COMPOUND EPOXY ADHESIVE


 

PRODUCT DESCRIPTION

AA-BOND 28 is a two part, heat-resistant and low exotherm, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength. This industrial grade product does not have a strong odor and is widely used in all industries.

AA-BOND 28 contains a thixotrophic agent which impedes thinning out of the material during heat cure when properly mixed and cured.

GENERAL PROPERTIES

Appearance Amber
Cure Type Room temperature or Heat Cure
Benefits Room temperature or Heat Cure
Tough enamel like cure
Bonds to a variety of substrates
Weather resistant
Mix Ratio by weight 100:100 / Resin:Hardener
Substrates Metals, glass, ceramics, wood and many plastics
Operating Temperature -60 to 163 °C
Typical Application(s) Staking components, bonding, laminating and repair applications

UNCURED PROPERTIES

Specific Gravity, mixed 1.07
Reactive solids contents, % 100
Pot Life 60 minutes

CURE SCHEDULE

4 to 6 hours @ 65°C
24 hours @ 25°C

MISC PROPERTIES

Shelf Life 2 years closed packaging
Glass Transition Temp, Tg 93°C
Hardness, Shore D 78
Lap shear 2900 psi (Alum to Alum)

GENERAL INFORMATION

For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).

HOW TO USE

  1. Carefully clean and dry all surfaces to be bonded.
  2. Apply AA-BOND 28 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
  3. Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
  4. Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY

This epoxy can be supplied in various different packages.

Atom Adhesives
Typically replies within an hour

Atom Adhesives
Hi there 👋

How can I help you?
1:40
×
Chat with Us