Technical Product Bulletin
MEDIUM VISCOSITY / LOW VAPOR PRESSURE EPOXY ADHESIVE
PRODUCT DESCRIPTION
AA-BOND 2103 is a clear, near transparent, medium viscosity epoxy adhesive formulation developed for rigid laminating, sealing, and bonding applications where the combination of good wetting and improved mechanical electrical properties is required.
AA-BOND 2103 is a two-part liquid epoxy adhesive that contains no solvents and is easy to mix, use, and apply at room temperature.
AA-BOND 2103 develops strong, rigid, high-performance bonds to itself and to ceramics, glass and glass fabrics, metals, laminates and other composite materials, forestry and masonry products, and to most rigid plastics.
AA-BOND 2103 is an effective electrical insulator, and further provides excellent resistance to weather, galvanic action, vapors, JP4 fuel, gasoline, lubricants, and other petroleum products, mild acids and alkalis, salts, and other organic and inorganic compounds.
PRODUCT PROPERTIES
Appearance | Slight haze/Clear |
Cure Type | Room temperature or Heat Cure |
Benefits |
|
Mix Ratio by weight | 100:25 Resin to Hardener |
Substrates | Ceramics, glass to glass, fabrics, metals, laminates and other composite materials |
Operating Temperature | -60 to 125 °C |
Typical Applications | Rigid laminating, sealing, and bonding applications where the combination of good wetting and improved mechanical electrical properties is required. |
UNCURED PROPERTIES
Specific Gravity | 1.2 |
Reactive solids contents, % | 100 |
Pot Life | 20 minutes |
CURE SCHEDULE
4 hours | 65°C |
24 hours | 25°C |
CURED PROPERTIES
Volume Resistivity | 6.00e+13 ohm-cm |
Dielectric Constant | 4.1 |
Dielectric Strength | 420 kV/in |
Hardness, Shore D | 85 |
GENERAL INFORMATION
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE
- Carefully clean and dry all surfaces to be bonded.
- Apply AA-BOND 2103 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
- Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
- Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
AVAILABILITY
This epoxy can be supplied in various different packages.
Data Sheets: TDS | MSDS available upon request.