AA-DUCT 771 High-Performance Conductive Silver Epoxy 2µm Max Particle Size, 2 Part Room Temp Cure

$1,199.60 - $3,899.99
SKU:
AA-DUCT 771

Technical Product Bulletin

SILVER-FILLED CONDUCTIVE EPOXY ADHESIVE


 

PRODUCT DESCRIPTION

AA-DUCT 771 is a two-component, room-temperature curing, silver-filled conductive epoxy formulated for precise applications requiring ultra-fine particle sizes of 2 microns or smaller.

This high-performance epoxy offers versatile curing options, curing at room temperature or with heat acceleration, making it ideal for applications that demand the smallest possible conductive particles.

AA-DUCT 771 delivers outstanding mechanical, electrical, and physical performance, maintaining reliability at temperatures up to 180°C.

It is a smooth, soft paste that can be applied by hand, automatic dispensers, screen-printing, transfer, or stamping techniques, forming a complete percolation network within 20-micron holes.

PRODUCT PROPERTIES

Color Silver
Cure Type Room Temperature or Heat Cure
Benefits
  • High strength
  • Perfect bond
  • Cold solder for heat-sensitive components
Mix Ratio by Weight 100:4 Resin to Hardener
Substrates Metal, Glass, Aluminum, Steel, Bronze, Nickel, Wood, Ceramic, and more
Operating Temperature -40°C (-40°F) to +180°C (356°F)
Typical Applications Die attach, circuitry, printed circuit board, and electronics repair

UNCURED PROPERTIES

Viscosity @ 25°C, cps 100,000 ±10,000
Specific Gravity, Mixed 3.40
Reactive Solids Contents, % 100
Pot Life 30 minutes
Shelf Life 6 months (plastic pouch), 1 year (jar kit)

CURE SCHEDULE

24 Hours 25°C (77°F)
90 Minutes 60°C (140°F)
45 Minutes 80°C (176°F)
15 Minutes 120°C (212°F)

CURED PROPERTIES

Hardness, Shore D 80
Volume Resistivity, ohm·cm 0.002
Lap Shear Strength to Aluminum, PSI 1800

THERMAL PROPERTIES

Thermal Conductivity, W/mK 2.2
Operating Temperature Range -40°C (-40°F) to +180°C (356°F)

GENERAL INFORMATION

For safe handling information on this product, consult the Safety Data Sheet (SDS).

HOW TO USE

  1. Carefully clean and dry all surfaces to be bonded.
  2. Apply AA-DUCT 771 completely mixed epoxy to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
  3. Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
  4. Some ingredients in this formulation may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C (125°F) for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

AVAILABILITY

This epoxy can be supplied in many different packages.

Atom Adhesives
Typically replies within an hour

Atom Adhesives
Hi there 👋

How can I help you?
1:40
×
Chat with Us