AA-BOND F113 High Impact Optically Clear Epoxy Adhesive, Two part, Low Viscosity whicking

$9.99 - $299.99
SKU:
AA-BOND F113-1-1
AA-BOND F113 High Impact Optically Clear Epoxy Adhesive, Two part, Low Viscosity whicking

 

 

Technical Product Bulletin

AA-BOND F113 OPTICALLY CLEAR EPOXY ADHESIVE

Shop Now - In Stock

PRODUCT DESCRIPTION

AA-BOND F113 is an optically clear, low-viscosity, high-impact epoxy adhesive designed for bonding and small-volume potting of plastic or glass optical fibers, lenses, prisms, LED displays, and other optical components. It offers 97% optical transmittance across 320–900 nm, ensuring excellent clarity for optical applications.

This two-part adhesive provides excellent wetting, a good pot life (60 minutes), and improved impact strength. It cures at room temperature or with heat, forming strong bonds to glass, glass fibers, ceramics, many metals, and most rigid plastics, with resistance to thermal shock, weather, water, gases, petroleum products, mild acids, and alkalis.

Ideal for laminating, sealing, and bonding in fiber optic assemblies, LED displays, and optical systems, AA-BOND F113 is available in various packaging options.

PRODUCT PROPERTIES

Color Part A (Resin): Clear
Part B (Hardener): Clear to light yellow
Mixed: Clear
Components 2 component - requires mixing
Cure Type Room Temperature or Heat Cure
Benefits
  • Optically clear (97% transmittance)
  • Thermal shock and impact resistant
  • Low stress connections
  • Excellent wetting properties
Mix Ratio by Weight 100:30 Resin to Hardener
Operating Temperature -40°C (-40°F) to +100°C (212°F)
Substrates Glass, glass fibers, ceramics, metals, rigid plastics
Typical Applications Fiber optic assembly, lenses, prisms, LED displays, optical bonding

UNCURED PROPERTIES

Mixed Viscosity @ 25°C, cps 175 ± 30
Specific Gravity, gm/cc Mixed: 1.13
Reactive Solids Contents, % 100
Pot Life 60 minutes

CURE SCHEDULE

24 Hours 25°C (77°F)
1-2 Hours 65°C (149°F)

CURED PROPERTIES

Refractive Index 1.57 @ 589 nm
Optical Transmittance 98% (320–900 nm)
Hardness, Shore D 78
Volume Resistivity, ohm·cm 9.0 E+8
Lap Shear Strength to Aluminum, PSI 4000 (2 hrs @ 65°C)
Dielectric Strength, Kv/in 430

THERMAL PROPERTIES

CTE, Linear 30.6 µin/in-°F @ 68.0°F
Glass Transition Temperature (Tg), Ultimate 45°C (113°F)

GENERAL INFORMATION

For safe handling information, consult the Safety Data Sheet (SDS).

HOW TO USE

  1. Carefully clean and dry all surfaces to be bonded.
  2. Apply AA-BOND F113 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; maintain contact until adhesive is completely cured.
  3. Thoroughly mix the contents of the shipping container prior to use, as separation of components may occur during shipping and storage.
  4. If ingredients crystallize due to low temperature storage, warm to 52°C for 30 minutes before mixing to re-dissolve for best results.
  5. Cure according to the schedule: 24 hours at 25°C or 1-2 hours at 65°C.

AVAILABILITY

Available in various packaging options. Contact us for bulk orders or custom configurations.

CUSTOMER TESTIMONIALS

Sarah Thompson: "Perfect for optical bonding, clear finish and strong adhesion."

Michael Lee: "Excellent clarity and impact resistance for LED projects."

Data Sheets: TDS | SDS available upon request.

FREQUENTLY ASKED QUESTIONS

Can AA-BOND F113 cure at room temperature? Yes, it cures in 24 hours at 25°C or faster with heat (1-2 hours at 65°C).

What is its optical transmittance? 98% across 320–900 nm, making it ideal for optical applications.

Is it suitable for LED displays? Yes, its clarity and impact resistance are perfect for LED bonding.

What substrates does it bond? Glass, ceramics, metals, and rigid plastics.

How long is the pot life? 60 minutes, allowing ample working time.

Atom Adhesives
Typically replies within an hour

Atom Adhesives
Hi there 👋

How can I help you?
1:40
×
Chat with Us