Free Shipping for limited time.
Technical Product Bulletin
5 Minute Adhesive Epoxy Gel, 50mL Cartridge Structural
PRODUCT DESCRIPTION
Atom Adhesives 5 Minute Epoxy Gel – Fix It Fast. Fix It Strong.
When time is critical and reliability matters, this fast-setting epoxy gel is your powerhouse solution. From sealing leaks to bonding metal, wood, concrete, and more, Atom Adhesives delivers unmatched strength with zero hassle.
Why It’s a Game-Changer:
- Rapid Cure: Achieve a rock-solid bond in just 1 hour after applying—no waiting, no downtime.
- All-Purpose Performance: Bonds metal, wood, concrete, plastic, and beyond.
- Gap-Filling Power: Handles uneven surfaces and imperfections with ease.
- Unyielding Strength: 2,800 psi tensile strength for repairs that last.
- Chemical Resistance: Defies gas, oil, and harsh solvents for ultimate durability.
- Non-Sag Formula: Perfect for vertical applications—no drips, no mess.
Key Features
- High tensile strength (2,800 psi)
- Excellent resistance to gas, oil, and solvents
- Non-sag for vertical surfaces
- Superior gap-filling without shrinkage
- Fast cure for machinery and equipment repairs
Specifications
- Open time: 4–7 minutes
- Fixture time: 10–15 minutes
- Gap fill: 0.01″–0.05″
Note: 5 Minute Epoxy 14265 develops a high exotherm. Use immediately after mixing. The exothermic reaction begins within 2 minutes after initiating the mixing step, so have everything ready before mixing.
GENERAL PROPERTIES
Appearance | Slight haze/ slight straw |
Cure Type | Room temperature or Heat cure |
Benefits | Resistant to many organic/inorganics Strong bond strength Great electrical insulator Durable |
Mix Ratio by weight | 100:100 / Resin:Hardener |
Substrates | metals, plastics, concrete, sheetrock, tile, marble, stone, rock, plaster, cement, glass fabrics, wood, leather and rigid plastics |
Operating Temperature | -76 °F to 230 °F / -60 to 110 °C |
Typical Application(s) | Anything requiring the unique properties this adhesive offers |
Pot Life | 5 minutes |
UNCURED PROPERTIES
Viscosity @ 25 °C, mPa·s (cP) | Thixotropic |
Solids Content | 100% |
Specific Gravity, mixed | 1.2 g/cc |
CURE SCHEDULE
30 minutes | @ 65°C |
2 hours | @ 25°C / Room Temp |
MISC PROPERTIES
Volume Resistivity | 5.00e+11 ohm-cm |
Dielectric Constant | 4.8 |
Dielectric Strength | 410kV/in |
CTE, linear | 33.3 µin/in-°F @ RT |
Hardness, Shore D | 70 |
Glass Transition Temp, Tg | 25.0 °C, 77.0 °F |
GENERAL INFORMATION
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE
- Carefully clean and dry all surfaces to be bonded.
- 5 Minute Epoxy 14265 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
- Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
- Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
AVAILABILITY
This epoxy can be supplied in various different packages.
Data Sheets: TDS | MSDS available upon request.